The effects of temperature and sodium dodecyl benzene sulfonate (SDBS) concentration in hydrochloric acid (HCl) solution on aluminum corrosion rate were investigated using the response surface methodology (RSM) with central composite design (CCD). Optimization studies are an essential tool used in the corrosion systems. RSM is a statistical technique frequently used in most studies involving optimization. RSM was used to optimize the corrosion current density (icorr) of aluminum determined using the potentiodynamic polarization method and to evaluate the effects and the interactions of temperature and SDBS concentration. The lowest icorr was found as SDBS concentration at 130 mg/L and temperature at 24°C. This methodology was first applied successfully in optimizing the conditions that are needed to attain the minimum icorr of aluminum under tested conditions in this study.

You do not currently have access to this content.