Recent years have seen a significant increase in interest in smart anticorrosion coatings, which can detect corrosive situations and autonomously discharge corrosion inhibitors. The mild steel surface was coated with pH-sensitive nanocontainers that had been manufactured and doped into an epoxy coating. Elemental mapping, thermogravimetric analysis/differential scanning calorimetry, and electrochemical impedance spectroscopy (EIS) methods were used to examine dispersion homogeneity, thermal durability, and corrosion tolerance. The findings indicated that nanocontainers dispersed uniformly in epoxy and that doping nanocontainers had no effect on the epoxy properties. When immersed in NaCl solution with nanocontainer doping concentrations of 3%, 6%, and 9%, EIS findings showed a rise in epoxy corrosion resistance following 5 d, 10 d, 15 d, 25 d, and 30 d. This enhancement was attributable to the smart release of corrosion inhibitors to protect steel surfaces. Infrared thermography and corroded substrate images confirmed the EIS data. The Korsmeyer-Peppas kinetic model was the best model for fitting the obtained data.
Skip Nav Destination
Research Article| February 05 2023
Manufacturing of a Smart Coating by Using SiO2 Nanoparticles and Hexamine
Hadi Ebrahim Fathabadi;
CORROSION (2023) 79 (6): 665–682.
Hadi Ebrahim Fathabadi, Mohammad Ghorbani; Manufacturing of a Smart Coating by Using SiO2 Nanoparticles and Hexamine. CORROSION 1 June 2023; 79 (6): 665–682. doi: https://doi.org/10.5006/4146
Download citation file:
Don't already have an account? Register
You could not be signed in. Please check your email address / username and password and try again.
Could not validate captcha. Please try again.
Sign in via your InstitutionSign in via your Institution
Citing articles via
Study on accelerated corrosion behavior and mechanism of X80 pipeline steel welded joint under cyclic salt spray test
Hongchao Ji, Mengmeng Li, Naizheng Kang, Xiuli Wang, Yuanming Huo
Influence of Anions on the Corrosion Behaviour of 9Cr-1Mo Ferritic Steel in Aqueous Media
C. Thinaharan, S.C. Vanithakumari, A. Ravi Shankar, John Philip
Oxidation of NiCr and NiCrMo alloys at low temperatures
Cameron Volders, Gopalakrishnan Ramalingam, Valentina Angelici Avincola, Iradwikanari Waluyo, Adrian Hunt, Petra Reinke
Residual bond strength of highly corroded Reinforced Concrete
Ankit Kumar Jaiswal, S.S. Gadve
Molecular origin of the CO2 enhanced water wetting during corrosion of an oil layer-attached steel surface in water flows
Jialu Ouyang, Xixi Wang, Dajiang Zheng, Jian Zhang, Zi Ming Wang