Comparing Stress Corrosion Cracking Behavior of Additively Manufactured and Wrought 17-4PH Stainless Steel | Citedby Results | CORROSION

Skip to Main Content

Skip Nav Destination

Comparing Stress Corrosion Cracking Behavior of Additively Manufactured and Wrought 17-4PH Stainless Steel

CORROSION (2022) 78 (6): 528–546.

This article has been cited by the following articles in journals that are participating in CrossRef Cited-by Linking.

Mitigation of Stress Corrosion Cracking in Additively Manufactured Stainless Steel by Laser Shock Peening

Veronica Over
Y. Lawrence Yao

Journal of Manufacturing Science and Engineering (2025) 147 (3)

Using fused filament fabrication to improve the tribocorrosion behaviour of 17-4 PH SS in comparison to other metal forming techniques

Cristina García-Cabezón
Juan Alfonso Naranjo
Celia García-Hernández
Cristina Berges
Gemma Herranz
Fernando Martín-Pedrosa

Friction (2024) 12 (10): 2325.

The effect of low hydrogen content on hydrogen embrittlement of additively manufactured 17–4 stainless steel

Guy Ben-Hamu
Polina Metalnikov
Dan Eliezer

Progress in Additive Manufacturing (2024) 9 (5): 1319.

A materials selection framework for fastener-in-panel geometries using FEM and LEFM, to mitigate coating degradation and environmentally assisted cracking

R.S. Marshall
Z.D. Harris
M.K. Small
K.L. Brunner
J.T. Burns
R.G. Kelly

Corrosion Science (2024) 227: 111788.

Oscillating energy deposition of 17-4 PH alloy reinforced with tungsten carbide particles

Ke Li
Siyu Chen
Tao Wang
Guangrong Zhu
Xinling Song
Jianbo Lei

Ceramics International (2024) 50 (1): 238.

On the validity of the Tada stress intensity factor solution for the single edge notch tension specimen with pinned ends

Zachary D. Harris
Joseph W. Cochran
Richard P. Gangloff
Jacob D. Hochhalter
James T. Burns

Engineering Fracture Mechanics (2024) 301: 110037.

Corrosion and stress corrosion cracking resistances of the 17-4 precipitation hardened martensitic stainless steel additively manufactured using binder jet printing

Yida Xiong
Jayaraj Radhakrishnan
Sheng Huang
Yusheng Chua
Wei Shi
Upadrasta Ramamurty

Acta Materialia (2024) 281: 120417.

Nanometer-scale porosity evolution and mechanical properties of additively manufactured 17-4PH stainless steel

Trevor K. Shoemaker
Zachary D. Harris
James T. Burns

Materials Science and Engineering: A (2024) 902: 146567.

Recent research progress in hydrogen embrittlement of additively manufactured metals – A review

Ju Yao
Qiyang Tan
Jeffrey Venezuela
Andrej Atrens
Ming-Xing Zhang

Current Opinion in Solid State and Materials Science (2023) 27 (5): 101106.

Hydrogen embrittlement susceptibility of additively manufactured 316L stainless steel: Influence of post-processing, printing direction, temperature and pre-straining

G. Álvarez
Z. Harris
K. Wada
C. Rodríguez
E. Martínez-Pañeda

Additive Manufacturing (2023) 78: 103834.

Coupling Fracture Mechanics Experiments and Electrochemical Modeling to Mitigate Environment-Assisted Cracking in Engineering Components

Zachary D. Harris
Rebecca S. Marshall
Robert G. Kelly
James T. Burns

Corrosion (2023) 79 (3): 363.

On the relative efficacy of electropermeation and isothermal desorption approaches for measuring hydrogen diffusivity

Alfredo Zafra
Zachary Harris
Evzen Korec
Emilio Martínez-Pañeda

International Journal of Hydrogen Energy (2023) 48 (3): 1218.

Effect of Chloride Concentration on the Environment-Assisted Cracking Behavior of an Al-Mg Alloy in Atmospheric Environments

Patrick J. Steiner
Zachary D. Harris
James T. Burns

Corrosion (2023) 79 (10): 1223.