Hu, J.; Li, Z., and Zhang, Y., 2020. Numerical study on initial laying process of submarine cables for wave energy booster station in real sea states. In: Zheng, C.W.; Wang, Q.; Zhan, C., and Yang, S.B. (eds.), Air-Sea Interaction and Coastal Environments of the Maritime and Polar Silk Roads. Journal of Coastal Research, Special Issue No. 99, pp. 60-66. Coconut Creek (Florida), ISSN 0749-0208.

Based on real sea conditions of the national wave energy demonstration site in Wanshan sea area of Zhuhai City, China, some numerical experiments are carried out to simulate the submarine cables initial laying process of the Wave Energy Booster Station in this demonstration site. The numerical model is established with the Orcaflex software employed. The motion response of laying ship and the hydrodynamic characteristics of submarine cables are simulated here under three sea conditions, i.e. usual waves, waves with current combined and possible extreme waves. Research results show that the tension and curvature of the cable are large under the condition for wave direction perpendicular to the ship axial direction, which is a relatively bad sea condition. The current also has some influences on the submarine cable laying, and the maximum effective tension of cable produced by the combined wave-current action is 1.35 times that of cable with the wave action alone. When extreme waves appear, pitch, heave and heave acceleration of the laying ship and tension of the cable ends increases obviously. And the variation of effective tension at both cable ends can reach 1.67 times that of cable ends under usual random waves. The numerical model and research results in this paper can provide some guidance for the research and construction of the cable laying of booster stations for marine renewable energy power plants in real sea conditions.

This content is only available as a PDF.
You do not currently have access to this content.