This paper presents the findings of an assessment of the possible measures needed for the adoption of three-dimensional (3D) printing for sustainable low-income houses that can be beneficial to the urban poor. The study adopted a quantitative approach and answers were sought from construction professionals actively involved in a construction project in the country. The study revealed through factor analysis that 3D printing for sustainable low-income housing delivery in South Africa could be encouraged through effective promotion and training, government support, improvement of 3D printing technology, and affordability of the technology. The study contributes significantly to the body of knowledge as it reveals the possible measures for improving the adoption of 3D printing in housing delivery in South Africa—an aspect that has not gained significant attention in the fourth industrial revolution and housing delivery discourse in the country.

3D printing, additive manufacturing, low-income housing, contour crafting, South Africa
Abderrahim,
M.,
Garcia,
E.,
Diez,
R.,
and
Balaguer
, (
2003
).
A mechatronic security system for construction site
.
Journal of Automation in Construction
,
14
(
4
),
460
–
466
Google Scholar
 
Aghimien,
D. O.,
Adegbemo,
T. F.,
Aghimien,
I. E.,
and
Awodele,
A. O.
 (
2018
).
Challenges of Sustainable Construction: A Study of Educational Buildings in Nigeria
.
International Journal of Built Environment and Sustainability
,
5
(
1
),
33
–
46
Google Scholar
 
Aigbavboa,
C.O.,
and
Thwala,
W.D.
 (
2013
).
Residents’ Perception of Subsidised Low-income Housing in South Africa: A Case Study of Kliptown, Johannesburg
.
J Hum Ecol
,
42
(
1
),
17
–
23
Google Scholar
 
Ajayi,
RJ
 (
2012
).
Strategies for sustainable housing co-operatives in South Africa
.
Unpublished PhD thesis submitted to the department of Construction management,
Nelson Mandela University
,
Port Elizabeth
.
Ametepey,
O.
and
Aigbavboa,
C.
 (
2014
).
Practitioners perspectives for the implementation of sustainable construction in Ghana
.
Proceedings of the DII-2014 Conference on Infrastructure Investments in Africa
,
Livingstone, Zambia
,
25–26 September
,
114
–
124
.
Google Scholar
 
Becerik,
B.
 (
2004
).
A review on past, present and future of web-based project management and collaboration tools and their adoption by the US AEC industry
,
Int. J. IT Architect, Engineering and Construction
,
2
(
3
),
233
–
248
Google Scholar
 
Berman,
B.
 (
2012
),
3-D printing: The new industrial revolution
.
Business horizons
,
55
(
2
),
155
–
162
.
Google Scholar
 
Bos,
F.,
Wolfs,
R.,
Ahmed,
Z.,
and
Salet
T.
 (
2016
).
Additive manufacturing of concrete in construction: potentials and challenges of 3D concrete printing
,
Virtual and Physical Prototyping
,
11
(
3
),
209
–
225
Google Scholar
 
Bradlow,
B.,
Bolnick,
J.,
and
Shearing,
C.
 (
2011
).
Housing, Institutions, Money: The Failures and Promise of Human Settlements Policy and Practice in South Africa
.
International Institute for Environment and Development
,
23
,
267
–
275
Google Scholar
 
Breann,
D. H.
 (
2012
).
Asserting Patents to Combat Infringement via 3DPrinting: It’s No “Use
.
Fordham Intellectual Property, Media & Entertainment, Law Journal
,
23
(
3
),
771
–
814
Google Scholar
 
Dickens,
P.,
Reeves,
P.,
and
Hague,
R.
 (
2012
).
Additive Manufacturing Education in the UK
, in:
23rd Annu. Int. Solid Free. Fabr. Symp., Laboratory for Freeform Fabrication
,
University of Texas at Austin
,
Austin, USA
,
1
–
13
Google Scholar
 
Dickinson,
H.
 (
2018
).
The Next Industrial Revolution? The Role of Public Administration in Supporting Government to Oversee 3D Printing Technologies
.
Public Administration Review
,
78
(
6
),
922
–
925
Google Scholar
 
Ellis,
G.
 (
2018
).
The Truth About 3D Printing in Construction
.
Construction productivity blog. Available online: https://blog.plangrid.com/2018/11/the-truth-about-3d-printing-inconstruction/
Google Scholar
 
Field,
A.
 (
2000
).
Discovering Statistics using SPSS for Windows
,
London–Thousand Oaks–New Delhi
:
Sage publications
Google Scholar
 
Fonseca,
L.M.
 (
2018
).
Industry 4.0 and the digital society: concepts, dimensions and envisioned benefit
.
Proceedings of the 12th International Conference on Business Excellence
,
34
,
386
–
397
Google Scholar
 
Ford,
S.,
and
Minshall,
T.
 (
2017
).
3D printing in teaching and education: A review of where and how it is used
.
Additive Manufacturing
,
25
,
131
–
150
Google Scholar
 
Ghasemi,
A.
and
Zahediasl,
S.
 (
2012
).
Normality test for statistical analysis: a guide for nonstatisticians
.
International Journal of Endocrinology and Metabolism
,
10
(
2
),
486
–
489
.
Google Scholar
 
Hager,
I.,
Golonka,
A.,
and
Putanowicz,
R.
 (
2016
).
3D printing of buildings and building components as the future of sustainable construction?
Procedia Engineering
,
151
,
292
–
299
Google Scholar
 
Hartmann,
M.
 (
2018
).
A solution to SA’s housing crisis is right under our noses
.
Available on: https://www.fin24.com/Opinion/a-solution-to-sas-housing-crisis-is-right-under-our-noses-20181224-2
Jin,
Y.,
and
Yu,
J.
 (
2016
).
Research on 3D Printing in China: A Review
.
International Journal of Research Studies in Science, Engineering and Technology
,
3
(
7
),
54
–
60
Google Scholar
 
Kayfi,
R.,
Ragab,
D.,
and
Tutunji,
T.A.
 (
2015
).
Mechatronic System Design Project: A 3D Printer Case Study
,
IEEE Jordan Conf. Appl. Electr. Eng. Comput. Technol
.,
IEEE
,
Amman, Jordan
,
1
–
6
Google Scholar
 
Lanko,
A.
 (
2018
).
Additive technologies in construction of temporary housing for victims of natural disasters and other emergencies
.
Springer International Publishing
,
692
,
1102
–
1108
Google Scholar
 
Lim,
S.,
Buswell,
R.A.,
Le,
T.T.,
Austin,
S.A,
Gibb,
A.G.F.,
and
Thorpe,
T.
 (
2012
).
Developments in construction-scale additive manufacturing processes
,
Automation in Construction
,
21
,
262
–
268
Google Scholar
 
Manomano,
T.,
and
Tanga,
PT
 (
2018
).
Housing needs: the quality and quantity of housing provided by the government for the poor in the Eastern Cape Province in South Africa
.
Social Work/Maatskaplike Werk
,
54
(
1
),
19
–
36
Google Scholar
 
Mazzucato,
M.
 (
2015
),
The Entrepreneurial State: Debunking Public vs. Private Sector Myths
.
New York
:
Public Affairs
.
Google Scholar
 
Mohd-Tobi,
A.L,
Omar,
S.A,
Yehia,
Z,
Al-Ojail,
S,
Hashimi,
A,
and
Orhan,
O.
 (
2018
).
Cost viability of 3D printed house in UK
.
IOP Conference Series: Materials Science and Engineering
,
319
,
1
,
1
–
7
Google Scholar
 
Moolla,
R.,
Kotze,
N.,
and
Block,
L.
 (
2011
).
Housing satisfaction and quality of life in RDP houses in Braamfischerville, Soweto: A South African case study
.
Urbani izziv
,
22
(
1
),
138
–
143
Google Scholar
 
Moser,
C.A.
and
Kalton,
G.
 (
1999
).
Survey Methods in Social Investigation
, 2nd ed.,
Gower Publishing, Company
,
Aldershot
.
Google Scholar
 
National Planning Commission
 (
2012
).
National Development Plan 2030: Our Future—Make it work, Executive summary
.
Available on: https://www.gov.za/sites/default/files/Executive%20Summary-NDP%202030%20-%20Our%20future%20-%20make%20it%20work.pdf
Nematollahi,
B.,
Xia,
M.,
and
Sanjayan,
J.
 (
2017
).
Current Progress of 3D Concrete Printing Technologies
.
34th International Symposium on Automation and Robotics in Construction, held in National Taiwan University of Science and Technology
,
Taipei, Taiwan
Google Scholar
 
Ng,
W.,
Tan,
J.,
and
Wang
G.
 (
2015
).
Opportunities and challenges in China’s 3D printing market
.
Ipsos Business Consulting
,
China
.
Available on: https://www.ipsos.com/sites/default/files/ct/publication/documents/2018-09/opportunities_and_challenges_in_chinas_3d_printing_market-may2015.pdf
Google Scholar
 
Oke,
A. E,
Aghimien,
D. O,
Aigbavboa,
C. O,
and
Musenga,
C.
 (
2019
).
Drivers of Sustainable Construction Practices in the Zambian Construction Industry
.
Energy Procedia
,
158
,
3246
–
3252
Google Scholar
 
Oke,
A. E.,
Aghimien,
D. O.,
Aigbavboa,
C. O.,
and
Koloko
N.
 (
2018
).
Challenges of Digital Collaboration in the South African Construction Industry
.
Proceedings of the International Conference on Industrial Engineering and Operations Management
,
Bandung, Indonesia
,
March 6–8
,
2472
–
2482
Google Scholar
 
Pallant,
J.
 (
2005
).
SPSS Survival Manual: A Step by Step Guide to Data Analysis Using SPSS for Windows (Version 12)
. 2nd ed,
Allen and Unwin
,
Crows Nest NSW2065 Australia
(
2005
)
Google Scholar
 
Paul,
S.C.,
van Zijl,
GPAG,
Tan,
M. J.,
and
Gibson,
I.
 (
2018
).
A review of 3D concrete printing systems and materials properties: current status and future research prospects
.
Rapid Prototyping Journal
,
24
(
4
),
784
–
798
Google Scholar
 
Pîrjan,
A.,
and
Petroşanu,
D.M.
 (
2013
).
The impact of 3D printing technology on the society and economy
.
Journal of Information Systems and Operations Management
,
7
(
2
),
163
–
173
Google Scholar
 
Poullain,
P.,
Paquet,
E.,
Garnier,
S.,
and
Furet,
B.
 (
2018
)
On site deployment of 3D printing for the building construction—The case of Yhnova TM
,
MATEC Web of Conferences
,
163
,
1
–
10
Google Scholar
 
Preacher,
K. J.,
and
MacCallum,
R. C.
 (
2002
).
Exploratory Factor Analysis in Behaviour Genetics Research: Factor Recovery with Small Sample Sizes
,
Behaviour Genetics
,
32
,
153
–
161
Google Scholar
 
Sakin,
M.,
and
Kiroglu,
Y.C.
 (
2017
).
3D Printing of Buildings: Construction of the Sustainable Houses of the Future by BIM
.
Energy Procedia
,
134
,
702
–
711
Google Scholar
 
Stern,
L.
 (
2010
).
A visual approach to SPSS for Windows: a guide to SPSS 17.0
. 2nd ed.,
Boston
:
Allyn and Bacon
Google Scholar
 
Tabachnick,
B.G.,
Fidell,
LS
:
Using Multivariate Statistics,”
5th edition,
Pearson Education
,
Boston
(
2007
).
Google Scholar
 
Tay,
Y.W.D.,
Panda,
B,
Paul,
S.C,
Mohamed,
N. A. N.,
Tan,
M.J
and
Leong,
K.F.
 (
2017
).
3D printing trends in building and construction industry: a review
.
Virtual and Physical Prototyping
,
12
(
3
),
261
–
276
Google Scholar
 
United Nations
 (
2015
).
Transforming our world: The 2030 agenda for sustainable development
.
Available on: https://sustainabledevelopment.un.org/content/documents/21252030%20Agenda%20for%20Sustainable%20Development%20web.pdf
United Nations
 (
2020
).
Urban Poor
.
Available on: https://unfccc.int/climate-action/momentum-for-change/urban-poor
Wang,
G.,
and
Tain,
A.
 (
2015
)
Ipsos Business Consulting, Opportunities and challenges in China’s 3D printing market
,
May 2015
,
Shanghai
Wu,
P.,
Wang,
J.,
and
Wang,
X.
 (
2016
).
A critical review of the use of 3-D printing in the construction industry
.
Automation in Construction
,
68
,
21
–
31
Google Scholar
 
Yossef,
M.,
and
Chen,
A.,
 (
2015
).
Applicability and Limitations of 3D Printing for Civil Structures
.
Civil, Construction and Environmental Engineering Conference Presentations and Proceedings
,
35
,
287
–
246
Google Scholar
 
This content is only available as a PDF.

Author notes

1 & 2. cidb Centre of Excellence, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa

3, 4 & 5. SARChi in Sustainable Construction Management and Leadership in the Built Environment, Faculty of Engineering and the Built Environment, University of Johannesburg, Johannesburg, South Africa