Among the major challenges facing the modern era of technological and industrial advancements are pollution and exponentially growing energy consumption. Pollution continues to be a menace affecting different aspects of life such as health, productivity, and comfort. This paper focuses on the elimination or reduction of sound pollution in buildings using cement-based boards made from pretreated coconut coir and oil palm fibers obtained from agricultural residues. The study includes an account of the preparation of fiber cement boards made from Portland cement Type 1, limestone powder, water, sand, and pretreated coconut coir and oil palm fibers at 5, 10, 15, and 20% by weight of powder materials, respectively, and a high-range water reducer in order to make sure that the natural materials would be spread in an even way throughout the specimens. Sound insulation tests were performed as key indicators of the performance of the fiber cement boards. It was found that an increase in the proportion of natural materials resulted in fiber cement boards with decreased density, compressive strength, and flexural strength. Furthermore, in relation to both physical and mechanical performance, the boards incorporating coconut fibers were superior to those incorporating oil palm fibers. With an increased proportion of natural fibers, sound insulation performance tended to improve. The boards prepared with coconut coir and oil palm fibers in this study yielded acceptable physical and mechanical properties and showed promise in relation to providing insulative protection against sound.

Agopyan,
V.,
Savastano,
H.
John,
V. M.,
and
Cincotto,
M. A.
(
2005
).
Developments on vegetable fibre–cement based materials in São Paulo, Brazil: An overview
.
Cement and Concrete Composite
,
27
(
5
),
527
536
.
Arenas,
J.,
and
Crocker
M. J.
(
2010
).
Recent trends in porous sound absorbing materials
.
Sound and Vibration
,
44
(
7
),
12
18
Arenas,
J.,
del Rey,
R.,
Alba,
J.,
and
Oltra,
R.
(
2020
).
Sound-Absorption Properties of Materials Made of Esparto Grass Fibers
.
Sustainability
,
12
(
14
),
5533
.
Arunmas,
P.,
and
Wipatayotim,
A.
(
2018
).
EU move fueling unease among palm oil produces
.
Asasutjarit,
C.,
Charoenva,
S.,
Hirunlabh,
J.,
and
Khedari,
J.
(
2009
).
Material and mechanical properties of pre-treated coir-based green composites
.
Composites Part B: Engineering
,
40
,
633
637
.
Asasutjarit,
C.,
Hirunlabh,
J.,
Khedari,
J.,
Charoenvai,
S.,
Zeghmati,
B.,
and
Shin,
U.C.
(
2007
).
Development of coconut coir-based lightweight cement board
.
Construction and Building Materials
,
21
(
2
),
277
288
.
Asdrubali,
F.,
D’Alessandro,
F.,
and
Schiavoni,
S.
(
2015
).
A review of unconventional sustainable building insulation materials
.
Sustainable Materials and Technology
,
4
,
1
17
.
ASTM.
(
2016
).
ASTM C1186 Standard Specification for Flat Fiber-Cement Sheets
.
American Society of Testing and Material (ASTM)
.
ASTM.
(
2016
).
ASTM C109 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] cube specimens
.
American Society of Testing and Material (ASTM)
.
ASTM.
(
2016
).
ASTM C1185 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
.
American Society of Testing and Material (ASTM)
.
ASTM.
(
2016
).
ASTM C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk density of Burned Refractory Brick and Shapes by Boiling Water
.
American Society of Testing and Material (ASTM)
.
ASTM.
(
2016
).
ASTM E90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
.
American Society of Testing and Material (ASTM)
.
Bousri,
K.
(
2001
).
The production of thermal insulation boards from rice straw
.
Master of Engineering Thesis,
King Mongkut’s University of Technology Thonburi
,
Bangkok, Thailand
.
Chuanraktam,
W.
(
2005
).
Palm oil innovation: From the food industry to renewable energy sources in Thailand
.
Engineering Today
,
3
(
36
),
58
63
.
Communities Scotland.
(
2006
).
Improving Sound Insulation in Dwellings
.
Cook
D.J.,
Pama
R.P.,
Weerasingle
R.P., H.
. (
1978
).
Coir fibre reinforced cement as a low-cost roofing material
.
Building and Environment
,
13
(
3
),
193
198
.
Del Vasto,
S.,
Toro,
E.F.,
Perdomo,
F.,
and
Mejía de Gutiérrez,
R.
(
2010
).
An appropriate vacuum technology for the manufacture of corrugated fique fiber reinforced cementitious sheets
.
Construction and Building Materials
,
24
(
2
),
187
192
.
Egan,
M.D.
(
1972
).
Concept in Architectural Acoustic
.
McGraw-Hill
.
Fouladi,
M.,
Nor,
M.,
Ayub,
M.,
and
Leman,
Z.
(
2010
).
Utilization of coir fiber in multilayer acoustic absorption panel
.
Applied Acoustics
,
71
(
3
),
241
249
.
Hansen,
C.H.
(
1993
).
Sound transmission of corrugated panels
.
Noise Control Engineering
,
40
,
187
197
.
Harris,
D.A.
(
1997
).
Noise Control Manual for Resident Buildings
.
McGraw-Hill
.
Ilvessalo-Pfäffli,
M.-S.
(
1995
).
Fiber Atlas: Identification of Papermaking Fibers
,
Springer
,
1995.
Innotherm.
(
2019
).
Product information
.
Available at: http://www.inno-therm.com/productinformation/. (Accessed 4 March 2020).
ISO.
(
1998
).
ISO 140-4 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 4: Field measurements of airborne sound insulation between rooms
.
ISO
.
Karthikeyan,
A.,
and
Balamurugan,
K.
(
2012
).
Effect of alkali treatment and fiber length on impact behavior of coir fiber reinforced epoxy composites
.
Journal of Scientific & Industrial Research
,
71
(
9
),
627
631
.
Khan,
W.S.,
Asmatulu,
R.,
and
Yildirim,
M.B.
(
2012
).
Acoustical properties of electrospun fibers for aircraft interior noise reduction
.
Journal of Aerospace Engineering
,
25
,
376
382
.
Khedari,
J.,
Nankongnaba,
N.,
Hirunlabhb,
J.,
and
Teekasapb,
S.
(
2004
).
New low-cost insulation particleboards from mixture of durian peel and coconut coir
.
Building and Environment
,
39
,
59
65
.
Khedari,
J.,
Suttisonk,
B.,
Pratinthong,
N.,
and
Hirunlabh,
J.
(
2001
).
New lightweight composite construction materials with low thermal conductivity
.
Cement and Concrete Composites
,
23
(
1
),
65
70
.
Koizumi,
T.,
Tsujiuchi,
N.,
and
Adachi,
A.
(
2002
).
The Development of Sound Absorbing Materials Using Natural Bamboo Fibers, High Performance Structures and Composites
.
WIT Press
,
Southampton
.
Kriker,
A.,
Debicki,
G.,
Bali,
A.,
Khenfe,
M.M.,
and
Chabannet,
M.
(
2005
).
Mechanical properties of date palm fibres and concrete reinforced with date palm fibres in hot-dry climate
.
Cement and Concrete Composites
,
27
(
5
),
554
564
.
Lertwattanaruk,
P.,
and
Suntijitto,
A.
(
2012
).
Properties of natural fiber cement materials containing coconut coir and oil palm fibers for residential building applications
,
Construction and Building Materials
,
94
,
664
669
.
Lewin,
M.,
Goldstein,
I.
(
1991
).
Wood Structure and Composition
.
Dekker
.
Mamtaz,
H.,
Fouladi,
M.,
Al-Atabi,
M.,
and
Namasivayam,
S.
(
2016
).
Acoustic Absorption of Natural Fiber Composites
.
Journal of Engineering
,
7
,
1
11
.
Miller,
R.K.,
and
Montone,
W. V.
(
1978
).
Handbook of Acoustical Enclosures and Barriers
.
Fairmont Press
,
Atlanta
.
Narang,
P.P.
(
1995
).
Material parameter selection in polyester fibre insulation for sound transmission and absorption
.
Applied Acoustics
,
45
(
4
),
335
358
.
Neithalath,
N.,
Weiss,
J.,
and
Olek,
J.
(
2004
).
Acoustic performance and damping behavior of cellulose–cement composites
,
Cement and Concrete Composites
,
26
(
4
), pp.
359
370
.
Ng,
C. F.,
and
Zheng,
H.
(
1997
).
Sound transmission through a double-leaf corrugated panel
.
Applied Acoustics
,
53
(
1
),
15
34
.
Odera,
R.S.,
Onukwuli,
O.D.,
and
Osoka,
E.C.
(
2011
).
Tensile and compressive strength characteristics of raffia palm fibre-cement composites
,
Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS)
,
2
(
2
), pp.
231
234
.
Papanikolaou,
G.,
and
Trochides,
A.
(
1988
).
Design of a test facility for transmission loss measurement
.
Applied Acoustics
,
18
(
5
),
315
323
.
Park,
S.B.
(
2000
).
Concrete for sound absorption
,
Applied Acoustics
,
12
(
5
), pp.
33
37
.
Pickering,
K.L.,
Efendy,
M.G.A.,
Le,
T.M.
(
2016
).
A review of recent developments in natural fibre composites and their mechanical performance
.
Composites Part A: Applied Science and Manufacturing
,
83
,
98
112
.
Praščević,
M.,
Cvetković,
D.,
and
Mihajlov,
D.
(
2012
).
Comparison of prediction and measurement methods for sound insulation, Facta Universitatis
.
Series: Architecture and Civil Engineering
,
10
(
2
),
155
167
.
Rangsiraksa,
P.
(
2008
).
Noise control in building
.
Master of Architecture Thesis,
King Mongkut Institute of Technology Ladkrabang
,
Bangkok, Thailand
.
Saheb,
N.D.,
and
Jog,
J.P.
(
1999
).
Natural fiber polymer composites
.
Polymer Technology
,
18
351
363
.
Schindler,
W.D.,
and
Hauser,
P.J.
(
2004
).
Chemical Finishing of Textiles, 1st edition
.
Woodhead
.
Seung,
B.P.,
Dae,
S.S.,
and
Lee,
J.
(
2004
).
Studies on the sound absorption characteristics of porous concrete based on the content of recycled aggregate and target void ratio
.
Cement and Concrete Research
,
35
,
1846
1854
.
Sun,
J.,
Sun,
X.,
Zhao,
H.,
and
Sun,
R.
(
2004
).
Isolation and characterization of cellulose from sugarcane bagasse
.
Polymer Degradation and Stability
,
84
(
2
),
331
339
.
Tan,
W.,
Lim,
E.,
Chuah,
H.,
Cheng,
E.,
and
Lam,
C.
(
2016
).
Sound transmission loss of natural fiber panel
.
International Journal of Mechanical & Mechatronics Engineering
,
16
(
6
),
33
42
.
Wazna,
M.E.,
Gounni,
A.,
Bouari,
A.E.,
Alami,
M.E.,
and
Cherkaoui,
O.
(
2018
).
Development, characterization and thermal performance of insulating nonwoven fabrics made from textile waste
.
Journal Industrial Textiles
,
48
,
1167
1183
.
Yang,
J.,
Yan,
R.,
Chen,
H.,
Lee,
D.,
and
Zheng,
C.
(
2007
).
Characteristics of hemicellulose, cellulose and lignin pyrolysis
.
Fuel
,
86
(
12
),
1781
1788
.
Zhao,
J.,
Wang,
X.,
Chang,
J.,
Yao,
Y.,
and
Cui,
Q.
(
2010
).
Sound insulation property of wood–waste tire rubber composite
.
Composite Science and Technology
,
70
,
2033
2038
.
This content is only available as a PDF.

Author notes

1. Faculty of Architecture and Planning, Thammasat University, Klong Luang, Pathumthani 12121, Thailand

2. Faculty of Industrial Technology, Phranakhon Rajabhat University, Bangkhen, Bangkok 10220, Thailand