Particle emission rates measured from ultra-high purity, cleanroom gas handling components following the test procedures specified in the SEMATECH test methods are described. A condensation nucleus particle counter (CNC) having a counting efficiency of 50 percent at 0.02 μm in diameter was used to measure the total particle contribution from the gas handling components. A spool piece was inserted to measure the baseline particle concentration of the test stand before the measurement of the test component was carried out. Eighteen test samples, six each from three suppliers (two domestic and one foreign), in each type of gas handling components (valves, point-of-use filters, pressure regulators), were tested using the revised test method. Particle contribution data obtained for fresh out-of-the-bag, stainless steel (SS) test samples, 1/4-in. in OD, from different manufacturers are summarized in this paper.
Particle Emissions from Gas Handling Components Measured According to the SEMATECH Test Methods
- Views Icon Views
- Share Icon Share
- Search Site
R. Periasamy, D. Ensor, A. Clayton, R. Donovan, J. Riddle; Particle Emissions from Gas Handling Components Measured According to the SEMATECH Test Methods. Journal of the IEST 31 January 1995; 38 (1): 29–33. doi: https://doi.org/10.17764/jiet.2.38.1.k7v376761500n082
Download citation file: