Skip to Main Content
Table 2.

Test parameters for the flume tests. A dispersant-to-oil ratio (DOR) of 1 to 20 was used in all tests. Approximately 70 tests were performed applying different combinations of the test parameters.

Test parameters for the flume tests. A dispersant-to-oil ratio (DOR) of 1 to 20 was used in all tests. Approximately 70 tests were performed applying different combinations of the test parameters.
View large
Test parameters for the flume tests. A dispersant-to-oil ratio (DOR) of 1 to 20 was used in all tests. Approximately 70 tests were performed applying different combinations of the test parameters.
View Large
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept