FIGURE 5.
SEM images (SE mode) of the coated Al-Si9-Cu3 and Al-Si7-Mg0.3 samples before immersion: (a) Al-Si9-Cu3 coated with MMT, (b) Al-Si7-Mg0.3 coated with MMT, (c) Al-Si9-Cu3 coated with ZG, and (d) Al-Si7-Mg0.3 coated with ZG. Inset in (d) is made at the cross section. Magnification 5,000×, 15 kV.

SEM images (SE mode) of the coated Al-Si9-Cu3 and Al-Si7-Mg0.3 samples before immersion: (a) Al-Si9-Cu3 coated with MMT, (b) Al-Si7-Mg0.3 coated with MMT, (c) Al-Si9-Cu3 coated with ZG, and (d) Al-Si7-Mg0.3 coated with ZG. Inset in (d) is made at the cross section. Magnification 5,000×, 15 kV.

Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal
This site uses cookies. By continuing to use our website, you are agreeing to our privacy policy.
Accept